A driveway with hairline cracks looks like a cosmetic problem until those cracks widen, shift, or start catching the edge of a shovel every winter.
That is when homeowners begin looking for concrete repair contractors and wondering if the slab can be saved or if it needs to come out altogether. But the honest answer is: It depends on what is going on below the surface and not just what you see on the surface.
What Causes Driveways and Patios to Crack or Sink?
One of the most common causes of premature failure of concrete in Utah is the freeze-thaw cycle. Water leaks into small cracks and freezes. It grows and forces the material around it out a bit.
Another important aspect is the soil movement. If there is a lot of clay, the slab has not been packed down well, or water collects under the slab, one section of a slab can sink while the rest remains level.
It’s full to the brim. RVs, trailers, and trucks sitting in the same spot for years can stress a slab that was not built thick enough to hold that weight.
A slab may also be a victim of its original construction method. Although the surface looks great on day one, thin pours, missing rebar, and a poorly compacted sub-base become issues years down the road.
How We Diagnose the Damage Before Any Repair Begins
We walk the surface and map out where the damage actually is before we recommend a fix. The same first step any qualified concrete repair contractor should take. A crack near an expansion joint is different from one in the middle of a slab.
Checking the Sub-Base
We look at how the slab sits in relation to the surrounding ground. If a section is missing, generally, there is nothing underneath it, and a surface repair will not last very long.
Testing for Moisture and Drainage
If you see standing water or a slab that stays wet longer than the surrounding ground, it means water is getting underneath instead of running off. We trace that water before we touch the repair itself.
Measuring Crack Movement
Hairline cracks less than an eighth of an inch are typically cosmetic. If the cracks are wider or have widened or moved with the seasons, that means the slab is still moving. You have to deal with that first.
Assessing Structural Condition
We tap for hollow spots, check for flaking, and look at the rebar exposure where it is visible. This shows if we are dealing with a surface issue or something that goes through the slab.
Repair Methods We Use for Cracked and Sunken Concrete
Once we have a handle on what is causing the damage, the repair typically falls into one of a few buckets. Most concrete driveway contractors in this area use the same basic techniques, though the correct choice depends on the diagnosis.
- Crack injection and patching: for stable cracks, we clean the crack, fill it with a flexible polymer or epoxy, and finish it flush with the surface.
- Slab leveling: for sunken sections, we lift the existing slab with polyurethane foam injected beneath it, rather than tearing the section out.
- Joint resealing: failed control joints let water into the sub-base, so resealing them is often part of a larger repair.
- Surface resurfacing: for slabs with widespread wear but a sound structure underneath, a bonded overlay restores a smooth finish without full replacement.
When Repair Makes Sense vs. When Replacement Is the Better Option
Not every broken driveway or patio needs to be removed, and at LT Contractors LLC, we prefer to tell a homeowner the truth rather than suggest a larger project than needed.
If the damage is localized, the sub-base is intact, and the slab has not lost structural integrity, repair is generally appropriate. Replacement makes sense when cracking is pervasive, a few sections have settled, or the original pour was too thin for the load it carries.
Age counts too. Driveways that are 20 years old with some isolated cracks can often be repaired and will give a few more years of use. If a slab has failed the same patch twice, it is usually telling you it is time for something more permanent.
What Concrete Stairs Repair Involves
Stairs are a whole different animal for concrete stairs contractors because they pose a different set of problems than a flat driveway or patio.
The treads and risers get constant foot traffic and exposure to the elements, so it is common for the edges to chip, even when the structure is sound. We match the patching material to the original mix for an invisible repair.
Cracking through a riser or where the stairs meet the main slab is generally a sign of settlement or a reinforcement problem underneath that needs to be corrected before any cosmetic patch will hold.
Why the Repair Process Matters as Much as the Materials
What you do with a repair is important, but so is the process behind it. We have seen patches by other concrete repair contractors fail in less than a year because they skipped the prep work, and here at LT Contractors LLC, we will not shortcut that step.
Proper prep means removing loose material, drying the area completely, and applying a bonding agent if needed so the new material will stick to the old. The number one reason patches fail early is missing that step.
The curing time is important too. One of the fastest ways to end up doing the same section over again in a season is to rush a repair back into service before the material has had a chance to properly set.
What Homeowners Should Expect From a Repair Visit
When you call concrete repair contractors out for an inspection, you want a clear walk-through of what they are seeing, not just a number at the end.
A reasonable visit will involve looking at drainage patterns and explaining why a particular method is being recommended. Those who ignore that conversation are usually the concrete driveway contractors who end up fixing the same thing twice.
We have the same standard whether it is a patio, a driveway, or a set of stairs. If you are shopping around for concrete stairs contractors or just trying to figure out if your driveway needs a patch or a full pour, LT Contractors LLC is happy to walk through what we find and lay out the options in plain terms.
Not every damaged slab needs to be replaced, but you do want an honest assessment from concrete repair contractors who will tell you what is really going on underneath before they suggest a fix.
FAQs
- Can a cracked driveway be repaired instead of replaced? Yes, many driveways with minor to moderate cracking can be fixed. The best solution depends on the size of the cracks, the condition of the sub-base, and whether the slab is still structurally sound.
- How do concrete repair contractors determine the cause of a sinking slab? Contractors are looking for soil movement, drainage problems, voids under the concrete, and signs of settlement in the slab. Root cause determination helps to identify the best way to repair.
- What is slab leveling, and when is it used? Slab leveling is a repair method that involves lifting the sunken concrete by injecting material underneath it. It is usually used when sections are settled but remain structurally sound.
- How long do concrete crack repairs typically last? How long a repair lasts depends on what caused the damage, what materials were used, and how well everything was prepared. Fixes that address the root of problems, such as drainage or soil movement, tend to last much longer.
- When is full concrete replacement necessary? Replacement often makes sense for slabs with widespread cracking, severe settlement, or significant structural damage, or if they were originally poured too thin to support the intended load.


